Custom drinkware lid and mold projects | ZILOOP

قالب غطاء مخصص: مشروع الأدوات

قالب الغطاء المخصص يستحق التكلفة من حجم معين. يشرح الدليل المسار: تثبيت التصميم، تصنيع القالب (20–35 يوماً)، عينات التجربة، الاعتماد، ثم الإنتاج — ومن يملك القالب. كما يغطي الإخراج من القالب وأسطح الإحكام والتفاوتات التي تحدد الإحكام لاحقاً، مع حساب تكلفة الأداة مقابل سعر القطعة.

الدليل الكامل متوفر باللغة الإنجليزية.

When a new lid is worth tooling

Tooling is justified when the lid is the product's differentiator — a unique drinking mode, a locking mechanism, a child-proof feature — or when an existing lid cannot meet a regulatory requirement.

If the goal is only branding, a new lid is usually the wrong spend; a new finish or logo method achieves more per unit.

The project sequence

Stage Output Typical duration
1. Design brief 2D drawings, functional requirements 3–5 days
2. 3D model STEP file for review 5–7 days
3. Tooling Mold made 20–35 days
4. Trial shots (T1) First samples 3–5 days
5. Revision Corrected samples (T2) 7–10 days
6. Approval Signed sample + spec sheet —

Two trial rounds is normal. Budget for three if the mechanism is new.

Cost structure

Tooling cost depends on cavity count, steel grade and mechanism complexity. A single-cavity lid mold is a fraction of a multi-cavity production tool; the trade-off is per-unit cost at volume.

Ask explicitly: who owns the tool, whether it can be transferred, and what the storage terms are if you stop ordering. Get it in writing — this is the single most common dispute in custom projects.

MOQ implications

Tooling projects carry a higher minimum because trial shots and setup consume capacity. Typical entry is 1,000 pcs for complex-structure products; confirm against the specific mechanism.

Related: magnetic series, smart bottles.

---