Drinkware factory capacity and vacuum lines | ZILOOP
قراءة طاقة المصنع وخطوط التفريغ
تُقاس الطاقة اليومية عند عنق الزجاجة — غالباً التفريغ أو الطلاء — بالوردية الكاملة ودون تغيير ألوان. لذلك لا تقول «18,000 قطعة يومياً» الكثير عن طلبك. يوضح الدليل الأسئلة التي تكشف الطاقة الحقيقية (أي محطة، كم وردية، الحمل الحالي)، وماذا يعني خط تفريغ تقنياً، ولماذا تحجز موعد الإنتاج بدل الحد الأقصى اليومي.
الدليل الكامل متوفر باللغة الإنجليزية.
What "18,000 pieces per day" actually measures
Daily capacity is normally quoted at the bottleneck station — usually vacuum or coating — at full shift, on a simple model, without colour changes. Your order will not hit that number if it involves multiple colours, small batches per SKU, or complex lids.
| Question to ask | Why |
|---|---|
| Capacity at which station? | Bottleneck determines real throughput |
| Single shift or three shifts? | Changes the number by 3× |
| Simple model or average mix? | Colour changes cost hours |
| What is the current load? | Capacity is not availability |
Vacuum line count
Three vacuum lines means three parallel sealing stations. It tells you the plant can run different models simultaneously, and gives redundancy if one line stops. It does not tell you the insulation performance of your specific model — that is a test result, not a line count.
How to use capacity data in planning
- Ask for the production slot you can book, not the daily maximum
- Plan a pilot order (500–1,000 pcs) before a seasonal peak order
- Confirm whether your model shares a line with other finishes
Related: factory tour, sourcing facts.
---