Kids straw water bottle factory | ZILOOP
زجاجات الأطفال بالمصاصة: التصنيع
تفشل زجاجات الأطفال بشكل مختلف: تسقط، وتُحمل مقلوبة في الحقيبة، وتُغسل كثيراً. يرتب الدليل حسب الفئة العمرية (السعة والوزن)، ويصف نقاط التسرب الأربع — سنّ الغطاء وقاعدة المصاصة والصمام واللحام — والاختبارات التي تحاكي الاستخدام: على الجانب ومقلوبة، سقوط على ستة أوجه، دورات الغطاء، خمس غسلات. مع المواد (SUS304، PP، سيليكون 50–60 شور A) ووثائق كل سوق.
الدليل الكامل متوفر باللغة الإنجليزية.
Age grade comes first
Everything downstream — part size, lid force, straw hardness, test protocol — depends on the age band you declare. A bottle designed for 3+ behaves differently from one for 6+, and the test list differs too.
| Age band | Key concern | Typical test |
|---|---|---|
| 12–36 months | Small parts, choking | Small-parts cylinder, torque/tension |
| 3–6 years | Lid force, drop | 1.5 m drop, lid cycle test |
| 6+ years | Durability, cleaning | Dishwasher cycles, straw pull force |
The straw is the weak point
Straws fail in three predictable ways: they detach under pull force, they collapse at the bend, or the silicone hardens after washing.
| Parameter | Practical spec |
|---|---|
| Material | Food-grade silicone, platinum-cured |
| Durometer | 50–60 Shore A (softer collapses, harder is hard to bite) |
| Pull force | State the minimum the straw must withstand |
| Bend radius | Test with the lid closed, not open |
Leak and drop testing
Ask for a written test report on the approved sample: inversion for 30 minutes, shake test with the lid closed, and a 1.5 m drop onto tile on all six faces. Record which face failed — that tells you where the design is weak.
MOQ and timing
| Scope | Minimum | Planning lead time |
|---|---|---|
| Existing kids model, logo only | 200 pcs | 25–30 days |
| New lid or straw geometry | 1,000 pcs | add tooling time |
| Custom character print | 500 pcs | add 5–7 days |
What to send
Age band, target market, test standard the buyer must meet, artwork and packaging.
Related: kids bottles, 14oz kids tumbler.
---