Powder coated water bottle wholesale | ZILOOP
زجاجات مطلية بالبودرة بالجملة
الطلاء بالبودرة أكثر التشطيبات استخداماً لزجاجات العلامات وأكثرها حساسية. يشرح الدليل المعالجة المسبقة وسماكة الطبقة وحرارة التبريد ومطابقة اللون، والفروق بين المطفي واللامع والمحكم. يوضح أين يفشل الطلاء (الحواف، سنّ الغطاء، لحام القاعدة)، والاختبارات (شبكة القطع، خمس غسلات، الاحتكاك)، وكيف تؤثر الألوان الخاصة في الحد الأدنى والمدة.
الدليل الكامل متوفر باللغة الإنجليزية.
Why powder coating is the default finish
Powder coating is applied as a dry powder and cured at around 180–200 °C, forming a film thicker than liquid paint (typically 60–90 μm). On drinkware it gives a uniform matte or gloss surface that resists chipping better than spray paint, and it holds colour well across batches.
The trade-off: it is thicker and less flexible, so it can chip at edges — around the base ring, the lid thread and the handle joint — if the substrate is not prepared properly.
Finish options and what they cost you
| Finish | Look | Durability | Typical use |
|---|---|---|---|
| Matte powder coat | Flat, soft-touch | Good | Brand programmes, retail |
| Gloss powder coat | Reflective | Good | Promotional, high-visibility |
| Textured / sand | Granular | Best chip resistance | Outdoor, construction, trades |
| Gradient | Two-tone | Medium | Gift and seasonal lines |
| Soft-touch | Rubberised feel | Medium — marks with oils | Premium retail |
What to check on a sample
- Cross-hatch adhesion — a razor grid test shows whether the film lifts
- Colour under two light sources — powder colours shift between daylight and retail lighting
- Edge coverage — base ring and thread are where chipping starts
- Drop test on a hard floor — a 1.5 m drop on tile shows chip behaviour at the base
- Dishwasher cycles — if the end user will machine-wash, run 5–10 cycles before approving
Colour matching
Pantone matching is possible but not exact: powder is a different chemistry from ink, and metallic or fluorescent references cannot be reproduced. For brand-critical colours we produce a spray-out panel for approval before bulk.
MOQ and lead time
| Scope | Minimum | Planning lead time |
|---|---|---|
| Standard colour, existing model | 200 pcs | 25–30 days bulk |
| Custom colour match | 500 pcs | add 5–7 days for panel approval |
| Gradient or two-tone | 1,000 pcs | add 7 days |
Next step
Send the Pantone reference and the model. We return a spray-out panel timeline and a written quotation.
Related: water bottles collection, 40oz insulated tumbler, all drinkware.
---