Stainless steel French press OEM supplier | ZILOOP
إبريق فرنسي من الفولاذ: مواصفات OEM
ثلاثة أجزاء تحدد جودة الإبريق الفرنسي: دليل المكبس، ودقة الشبكة، وبناء الجدار. الشبكة الواحدة تمرر الحبيبات الدقيقة، وأربع طبقات تُجدي فقط من 700 مل. يشرح الدليل السعات (350 و700 و1000 مل)، والاختبارات (مقاومة الضغط، الرواسب، حرارة المقبض، غسالة الأطباق)، وتدرج الحد الأدنى حسب التشطيب والحجم.
الدليل الكامل متوفر باللغة الإنجليزية.
The three parts that decide quality
| Part | What to specify | Why |
|---|---|---|
| Plunger | Rod diameter, seal type | Wobble lets grounds through |
| Mesh | 2–4 layers, micron grade | Single mesh passes fines |
| Body | Single or double wall | Double wall holds heat but costs more |
Capacity range
| Capacity | Cups | Best for |
|---|---|---|
| 350 ml | 1–2 | Single serve, office |
| 700 ml | 3–4 | Household, gifting |
| 1,000 ml | 5–6 | Cafés, catering |
What buyers over-specify
A four-layer mesh on a 350 ml press adds cost with little benefit; the benefit shows at 700 ml and above, where the bed depth is greater. Match the mesh to the capacity.
Test points
- Plunge resistance with a full load of coarse grounds
- Sediment in the cup after a 4-minute brew
- Handle temperature with boiling water (double wall should stay cool)
- Dishwasher cycle if claimed
MOQ
Standard models from 200 pcs; custom finish or capacity from 500 pcs; new body tooling at 1,000 pcs.
Related: French press collection, portable coffee maker.
---