Sublimation blank 40oz tumbler manufacturer | ZILOOP

فراغات التسامي 40 أونصة: التصنيع والفحص

التسامي يعمل فقط على فراغات مطلية؛ على الفولاذ العاري لا يلتصق الصباغ. يشرح الدليل الطلاء المطلوب، وكيف تختلف أبعاد اللف، ولماذا يحتاج فراغ 40 أونصة عرض لف مختلف عن 20 أونصة. يصف الاختبارات (التصاق الحواف، خمس غسلات، اختبار الخدش)، ويذكر الحد الأدنى والمدد لبرامج الموسم.

الدليل الكامل متوفر باللغة الإنجليزية.

What a "sublimation blank" is

A sublimation blank is a tumbler with a polymer coating applied so that dye-sub transfer paper can bond into the surface under heat and pressure. Without that coating, sublimation does not work on stainless steel at all.

This is the single most common misunderstanding in sourcing: buyers order "sublimation tumblers" from a listing that shows a coated sample, receive uncoated stock, and the transfer fails.

What to specify

Parameter Why it matters
Coating type White base for bright colours; clear base for metal-look transfers
Wrap area Height × circumference available for transfer — must clear the handle and lid
Coating thickness Too thin = washed-out colour; too thick = cracking at the seam
Cure / press temperature Supplier should state the tested range for their coating
Handle attachment A welded handle blocks a full wrap; specify a partial wrap

Testing a blank before you commit

  1. Press a test transfer at the supplier's stated temperature and time
  2. Wash 5 cycles at 60 °C and check for fade or edge lift
  3. Scratch the coating with a fingernail — it should not flake
  4. Check colour density at the wrap seam, where pressure is lowest

MOQ and lead time

Scope Minimum Planning lead time
Coated standard model 500 pcs 25–30 days
Custom wrap dimension 1,000 pcs add 7–10 days
Custom colour coating 1,000 pcs add 10 days

Next step

Tell us the press you use and the artwork dimensions. We confirm whether the selected 40oz model supports the wrap, and quote accordingly.

Related: 40oz tumblers, mugs and tumblers.

---