Vacuum insulated drinkware manufacturing | ZILOOP
كيف تُصنع أدوات الشرب المعزولة بالتفريغ
ست مراحل تنقل الفولاذ من اللفة إلى الزجاجة: التشكيل، اللحام، التفريغ، الإغلاق، الطلاء، التجميع — ثم الفحص. يصف الدليل كل مرحلة وأخطاءها الشائعة، وأهمها إغلاق المنفذ الذي يظهر غالباً بعد أسابيع. يوضح ما يجب أن يسجله المصنع عند الإغلاق، ولماذا الفحص بعد الطلاء مهم، والبيانات التي يجب أن يحتويها تقرير موثوق.
الدليل الكامل متوفر باللغة الإنجليزية.
From coil to carton: six stages
| Stage | What happens | Where it fails |
|---|---|---|
| 1. Forming | Stainless coil is drawn into inner and outer bodies | Wall thickness variation |
| 2. Welding | Bottom and seam welded; neck ring attached | Weld porosity |
| 3. Vacuum | Air evacuated between walls, then sealed | Seal integrity, vacuum level |
| 4. Finishing | Polishing, powder coating, printing | Coating adhesion |
| 5. Assembly | Lid, gasket, straw, base sleeve fitted | Gasket fit |
| 6. Inspection | Leak, insulation and visual checks | Sampling discipline |
Stage 3 is the one buyers underestimate
The vacuum is pulled through a small port and sealed. If the seal is imperfect, the bottle loses insulation gradually rather than failing immediately — which is why a one-day sample test can pass while the production lot underperforms three months later.
Ask for the vacuum level at sealing and a leak-decay check as part of the production record, not only the sample.
What you can control as a buyer
- Wall thickness — affects both insulation and weight
- Lid insulation — most heat escapes through the lid
- Finish — textured coatings hide handling marks better than gloss
- Inspection standard — agree on AQL level and the defect list before production
MOQ and timing
| Scope | Minimum | Planning lead time |
|---|---|---|
| Existing model, logo | 200 pcs | 25–30 days |
| New finish | 500 pcs | 30 days |
| New structure | 1,000 pcs | tooling schedule in writing |
Related: water bottles, 40oz tumblers.
---