Kids straw water bottle factory | ZILOOP
Age grade comes first
Everything downstream — part size, lid force, straw hardness, test protocol — depends on the age band you declare. A bottle designed for 3+ behaves differently from one for 6+, and the test list differs too.
| Age band | Key concern | Typical test |
|---|---|---|
| 12–36 months | Small parts, choking | Small-parts cylinder, torque/tension |
| 3–6 years | Lid force, drop | 1.5 m drop, lid cycle test |
| 6+ years | Durability, cleaning | Dishwasher cycles, straw pull force |
The straw is the weak point
Straws fail in three predictable ways: they detach under pull force, they collapse at the bend, or the silicone hardens after washing.
| Parameter | Practical spec |
|---|---|
| Material | Food-grade silicone, platinum-cured |
| Durometer | 50–60 Shore A (softer collapses, harder is hard to bite) |
| Pull force | State the minimum the straw must withstand |
| Bend radius | Test with the lid closed, not open |
Leak and drop testing
Ask for a written test report on the approved sample: inversion for 30 minutes, shake test with the lid closed, and a 1.5 m drop onto tile on all six faces. Record which face failed — that tells you where the design is weak.
MOQ and timing
| Scope | Minimum | Planning lead time |
|---|---|---|
| Existing kids model, logo only | 200 pcs | 25–30 days |
| New lid or straw geometry | 1,000 pcs | add tooling time |
| Custom character print | 500 pcs | add 5–7 days |
What to send
Age band, target market, test standard the buyer must meet, artwork and packaging.
Related: kids bottles, 14oz kids tumbler.
---