Custom drinkware lid and mold projects | ZILOOP
Eigen dekselmatrijs: het traject
Een eigen dekselmatrijs loont vanaf een bepaald volume. De gids beschrijft het traject: design freeze, matrijsbouw (20–35 dagen), proefstukken, goedkeuring, serieproductie — en de vraag wie eigenaar is van de matrijs. Ook ontluchting, afdichtvlakken en toleranties die later de dichtheid bepalen komen aan bod, met een rekenvoorbeeld van matrijskosten tegen stukprijs.
De volledige gids is beschikbaar in het Engels.
When a new lid is worth tooling
Tooling is justified when the lid is the product's differentiator — a unique drinking mode, a locking mechanism, a child-proof feature — or when an existing lid cannot meet a regulatory requirement.
If the goal is only branding, a new lid is usually the wrong spend; a new finish or logo method achieves more per unit.
The project sequence
| Stage | Output | Typical duration |
|---|---|---|
| 1. Design brief | 2D drawings, functional requirements | 3–5 days |
| 2. 3D model | STEP file for review | 5–7 days |
| 3. Tooling | Mold made | 20–35 days |
| 4. Trial shots (T1) | First samples | 3–5 days |
| 5. Revision | Corrected samples (T2) | 7–10 days |
| 6. Approval | Signed sample + spec sheet | — |
Two trial rounds is normal. Budget for three if the mechanism is new.
Cost structure
Tooling cost depends on cavity count, steel grade and mechanism complexity. A single-cavity lid mold is a fraction of a multi-cavity production tool; the trade-off is per-unit cost at volume.
Ask explicitly: who owns the tool, whether it can be transferred, and what the storage terms are if you stop ordering. Get it in writing — this is the single most common dispute in custom projects.
MOQ implications
Tooling projects carry a higher minimum because trial shots and setup consume capacity. Typical entry is 1,000 pcs for complex-structure products; confirm against the specific mechanism.
Related: magnetic series, smart bottles.
---