Stainless steel French press OEM supplier | ZILOOP

RVS French press: OEM-specificatie

Drie onderdelen bepalen de kwaliteit van een French press: plunjergeleiding, maaswijdte en wandopbouw. Een enkele zeef laat fijne delen door; vier lagen lonen pas vanaf 700 ml. De gids behandelt inhoud (350, 700, 1000 ml), tests (plunjerweerstand, sediment, greepstemperatuur, vaatwasser) en de MOQ-opbouw per afwerking en maat.

De volledige gids is beschikbaar in het Engels.

The three parts that decide quality

Part What to specify Why
Plunger Rod diameter, seal type Wobble lets grounds through
Mesh 2–4 layers, micron grade Single mesh passes fines
Body Single or double wall Double wall holds heat but costs more

Capacity range

Capacity Cups Best for
350 ml 1–2 Single serve, office
700 ml 3–4 Household, gifting
1,000 ml 5–6 Cafés, catering

What buyers over-specify

A four-layer mesh on a 350 ml press adds cost with little benefit; the benefit shows at 700 ml and above, where the bed depth is greater. Match the mesh to the capacity.

Test points

  1. Plunge resistance with a full load of coarse grounds
  2. Sediment in the cup after a 4-minute brew
  3. Handle temperature with boiling water (double wall should stay cool)
  4. Dishwasher cycle if claimed

MOQ

Standard models from 200 pcs; custom finish or capacity from 500 pcs; new body tooling at 1,000 pcs.

Related: French press collection, portable coffee maker.

---