Skip to product information
1 of 8

30oz & 40oz Stainless Steel Tumbler for B2B | ZILOOP

مباشرة من المصنع ✓ خدمة OEM/ODM ✓ شحن عالمي

أرسل الكمية المستهدفة والسوق ومتطلبات المنتج لنراجع الخيارات المناسبة.

This handled stainless steel tumbler is listed in 30 oz and 40 oz capacities for B2B drinkware projects. The gallery shows several colors, a side handle, a straw and a clear lid.

Listed specifications

Capacity 30 oz (900 ml) and 40 oz (1,180 ml) are listed; confirm the selected model.
Dimensions 30 oz: 75 × 75 × 225 mm; 40 oz: 75 × 75 × 265 mm (as listed; confirm measurement points, tolerances and the base diameter for the selected model)
Materials The listing identifies SUS304 stainless steel inside and SUS201 outside. Confirm grade, component mapping and material documents for the production model.
Construction Double-wall vacuum construction is stated in the listing. Verify the selected model and request thermal-retention test data.
Lid and straw The gallery shows a straw and clear lid. The listing describes a slide-and-sip lid and seal; confirm the drinking modes, straw material and leak-resistance test results.
Finish and color Powder coating, matte Teflon and Pantone colors are listed. Confirm coating composition, color availability and supporting documents for the selected model.
Vehicle fit Console compatibility is stated in the listing. Confirm the base diameter and fit against the intended vehicle or holder.

For a B2B quotation, share target quantity, destination market, preferred capacity and color, lid configuration, logo requirements and any material or test standards. Request a production sample and model-specific technical documents before confirming performance or food-contact claims.

درجة المادة: SUS304 inner / SUS201 outer (listed; verify selected model and material documents)

مدة التنفيذ: 10-30 Days for Bulk Order

الحد الأدنى للطلب: 200 pcs

مواصفات المنتج

The specifications shown on this page refer to this product listing. Please confirm capacity, dimensions and compatible components for your requested model before finalizing a quote or sample.

المواد والعناية

Materials and care requirements can differ between the product body, lid and components. Request the exact material grade and care instructions for the selected model and configuration.

خيارات التخصيص

Logo application, color or finish, lid and component choices, and packaging can be discussed by model. Share your artwork or reference, target quantity and destination market so feasible options can be confirmed for the selected product.

View full details

دليل مشاريع B2B

حوّل هذا الموديل إلى مواصفاتك

أرسل التفاصيل ليراجع فريقنا التكوين المناسب ويُعد عرض سعر خاصاً بالمنتج.

  1. 01

    اختر التكوين

    أكّد السعة ونوع الغطاء والاستخدام والتشطيب المطلوب.

  2. 02

    حدّد طريقة الزخرفة

    أرسل الشعار أو التصميم والموضع المطلوب. قد تشمل الخيارات الحفر بالليزر والطباعة بالشاشة والطباعة ثلاثية الأبعاد أو الرقمية، وفق مراجعة الموديل.

  3. 03

    خطّط للطلب

    أرسل الكمية المستهدفة واحتياجات العينات ومتطلبات التغليف والجدول الزمني. يُعتمد الحد الأدنى والمدة وفق المواصفات المختارة.

  4. 04

    أكّد متطلبات السوق الوجهة

    أرسل سوق الوجهة لنراجع التغليف والملصقات والوثائق المتاحة للموديل المحدد.

OEM/ODM والطلبات بالجملة لـ 30oz & 40oz Stainless Steel Tumbler for B2B | ZILOOP

يمكن إنتاج هذا الموديل بطلب خاص أو OEM. يُعتمد الشعار والألوان والتشطيبات والتغليف في التكوين المختار ضمن عرض السعر. أرسل السوق والكمية والتخصيص للحصول على الحد الأدنى والمدة الخاصة بالموديل.

معايير الطلب

  • الحد الأدنى للطلب: 200 قطعة للطلبات القياسية، ومن 100 قطعة لموديلات مختارة من المخزون؛ 500 للتصاميم المعقدة و1,000 للهياكل المعقدة
  • العينات: 5–7 أيام من اعتماد الموجز
  • الإنتاج: 25–30 يوماً من اعتماد العينة والدفعة المقدمة
  • المواد: SUS304 قياسي؛ SUS316 عند الطلب

التخصيص

  • الحفر بالليزر أو الطباعة بالشاشة أو الطباعة الوسادة أو الطباعة UV أو التسامي متى سمح التشطيب
  • الطلاء بالبودرة أو الطلاء بالرش أو مطابقة اللون
  • تغليف مخصص: كيس أو علبة ملونة أو علبة هدايا
  • تغييرات الغطاء أو المصاصة أو السعة في موديلات مختارة

Specifications on this page describe the standard configuration. Material grade, wall thickness, insulation performance and available documents are confirmed per model and per order — see the quotation and the test report scope before publishing claims.