How We Prevent Transit Damage for Bulk Tumbler Shipments
Share
Transit damage is rarely caused by poor handling. It is almost always caused by three decisions made before production: carton grade, internal protection and unit packaging. This guide covers what to specify, what to test and how packaging affects freight.
The specification that prevents most damage
| Item | Typical specification | Why it matters |
|---|---|---|
| Master carton | Five-layer K=K, burst strength >14 kg/cm² | Stacking strength inside a container |
| Internal protection | Moulded EPE insert | Stops body-to-body contact, the main damage cause |
| Unit packaging | Poly bag or colour box | Retail requirement; changes carton dimensions |
| Carton marking | SKU, quantity, carton number, destination | Warehouse handling and customs |
Why body-to-body contact is the main failure
Stainless drinkware is heavy relative to its size. In a carton with only a divider board, the units move against each other during transport and the coating rubs through at contact points. The damage is cosmetic but it is a customer claim.
A moulded EPE insert removes that movement. It costs more per carton than a corrugated divider and it is the single change that reduces claims most.
Test the packed carton, not the bare product
A drop test on an unpacked bottle proves very little. The relevant test is on the packed carton:
- Drop from 76–90 cm on all six faces
- Compression test at the stacking load expected in the container
- Open the carton after each test and inspect for contact marks, dents and lid damage
Ask for the test result as a document, not a description.
How packaging changes freight
For drinkware, carton volume drives freight more than weight does. A 10 mm change in carton height can shift several hundred units per 40HQ container.
| Change | Effect on freight |
|---|---|
| Colour box instead of poly bag | Larger carton, fewer units per container |
| Thicker EPE insert | Safer, slightly larger carton |
| Higher carton stacking (5 high vs 4) | More units per container, higher compression requirement |
Confirm carton dimensions before booking freight, not after.
What to write into the purchase order
- Carton grade and burst strength
- Internal protection type and thickness
- Unit packaging and whether artwork is supplied
- Drop test standard and acceptance criteria
- Carton marking format
- Pallet configuration and stretch wrapping
Pallet and container loading
Cartons that survive individual handling can still fail under stacking load. Two numbers decide the outcome: the compression strength of the carton and the number of tiers in the container.
- Stack no higher than the compression test supports, with a safety margin
- Use pallets for LCL shipments; loose cartons shift more
- Wrap pallets in stretch film and add corner boards
- Leave a gap at the container doors for load security, not for air
Labels and carton print
Retail programmes usually require more than a shipping mark:
| Label | Typical content |
|---|---|
| Shipping mark | SKU, quantity, carton number, destination port |
| Barcode | EAN/UPC per unit or per carton, confirmed by the buyer |
| Compliance label | Material, food-contact statement, country of origin |
| Handling marks | Fragile, this side up, keep dry |
Send label artwork with the purchase order. A missing barcode at the warehouse becomes a re-labelling cost.
Handling claims when damage happens
- Photograph the carton before opening, then the damage inside
- Record the carton number and the pallet position
- Compare against the inspection record from the factory
- Agree the split of responsibility in writing before re-shipping
Claims are settled faster when the packing specification, the inspection record and the photos all describe the same configuration.
Where to spend on packaging
Packaging budgets are finite, and not every element reduces claims equally. In order of return:
- Internal insert — the highest-value spend; removes movement
- Carton grade — prevents crushing in the upper tiers
- Unit packaging — a retail requirement, not a protection measure
- Print and finishes — marketing value, minimal protection value
If the budget only covers one upgrade, choose the insert.
Packaging QC before shipment
A packaging inspection is separate from the product inspection and covers: carton grade marking, insert fit, unit count per carton, label placement and pallet stability. It takes under an hour and catches the errors that generate claims.
Ask for photos of an opened carton from each lot, not from the first lot only.
Five mistakes buyers make
- Specifying packaging after production starts
- Approving a sample that was packed differently from the bulk order
- Testing the product, not the carton
- Ignoring carton dimensions until the freight quote arrives
- No written defect list for packaging damage
Related reading: the sample request checklist, the OEM/ODM process guide, and how to compare samples. To start a project, send the brief.
Last updated: November 2026.